Tel:
+86-531-82318516

中文 英文
MY POSITION:HOME > News > News
News

News

Eucalyptus Plywood VS Poplar plywood for construction

2019-05-27 17:32:50

Eucalyptus Plywood VS Poplar plywood for construction

PerformancePerformance JITONG 
Eucalyptus with film faced
Other Brand Film faced poplar plywood
Density
&
Weight
High Density,heavy,the thickness is 1.35cm 3x6ft board,the weight id 29kg Low Density、light,
the thickness is 1.35cm 3x6ft board,the weight id 22kg
Board process&Pressure
&Glue
High Glue-ability、big board pressure、high standard use the glue,adapting to the severe weather such as high temperature and heavy rain in the south. The climate in the north is relatively dry, the plate pressure is small, and the rubber standard is relatively low.
Strength The ultimate strength of eucalyptus is high, saving 20% of wood low ultimate strength, easy fatigue, and large wooden formula
The ability of water absorbing less water absorption, small expansion rate, and long-lasting brightness a large amount of water absorption, easy to expand, and the brightness of the board surface is obviously reduced. After 5 times, it is soft and uses more wood.
Wall effect The wall effect is darker, mirrored and shiny After 3-5 times, the wall is concave, whitish, rough, dull
Reusage time 25+ times 10-20 times